Comtech Style Mounting Rails for 5.25" Drives in various cases
  • Mounting screws included.
Items Part #
Rails COMT-RAIL

3.5" To 5.25" Conversion Kit For Half Ht. Bay
  • Fits most 3.5" hard drives including newest hole pattern.
  • Bezel w/LED available in 4 colors including (B)Black,(G)AT Beige,(W)White and (HPG)Gray.
  • Two types are available. (AT) includes AT rails. (XT) fits standard 5.25" bay.
  • Rubberized (XT) expansion is also available for more shock absorbancy.
  • Short expansion rails also available. Add "S" to the end of the part number to order.
Items Part #
(AT) Kit ATMS-LED-(Color)
(XT) Kit XTMS-LED-(Color)
Rails only MS-NFP-(Type)
Rubberized expansion rails only MS-NFP-XT-R

2.5" to 3.5" Conversion Kit
  • SCSI or IDE conversion available.
  • PCB converts to standard data and power.
  • Kit includes mounting screws and LED.
Items Part #
Bracket 2.5-3.5-BRKT
PCB(IDE) PCB-2.5-3.5I
PCB(SCSI) PCB-2.5-3.5N
Kit 2.5-3.5-K-(data)

3.5" to 5.25" Shock Mount Conversion Kit
  • Mounts in 5.25" bay and accepts most 3.5" hard drives.
  • Mounting screws included.
Items Part #
Bracket SHK-MT-KIT

AT Style Mounting Rails for 5.25" Drives
  • Mounting screws included.
Items Part #
Rails AT-EMS

Metal AT Style Mounting Rails for 5.25" Drives
  • Mounting screws included.
  • Rails have metal tabs to screw into front of drive bay.
Items Part #
Rails AT-METAL

Components for 2nd Drive in PC or XT
  • Mounting holes will accept most hard drives.
  • Mounting screws included.
Items Part #
Bracket PC-2-DR

3.5" to 5.25" Conversion Kit For Full Ht. Bay
  • Fits 3 1/3 ht. drives in a 5.25" full height bay.
  • Bezel includes LED's and is available in two colors:(B)Black or (G)Gray.
Items Part #
Bracket 3DR-BRKT
Bezel 3DR-FP-(Color)
Kit 3DR-KIT-(Color)

Fit 2nd 3.5" Hard Drive above 1st Drive
  • Fits 2nd 1"ht.3.5"drive above a 3.5" hard drive in system if space allows.
Item Part #
Rails APP-Q8-EXB

Fits 2.5"HD in 3.5" Bay
  • Fits 2.5" hard drive in CQ-EL5000 into 3.5" Bay.
  • Includes mounting screws.
  • Available in black or beige.
Items Part #
Caddy RD-EL

2.5" Conversion From New to Old Holes
  • Fits 2.5" hard drive with new hole pattern(at the corners of drive).
  • Converts drive to old hole pattern(near center of drive).
  • Mounting screws included.
  • Must be able to raise drive about 4mm and connect with flexible connector.
Items Part #
Bracket 2.5-CONV-BRKT

2.5" Conversion with cable from New to Old Holes
  • Converts new hole pattern on drive to old hole pattern.
  • Fits 2.5" 12mm (or smaller) drive into bay for 17mm or 19mm drive.
  • Includes cable to allow direct plug-in to fixed position connector.
  • Also includes mounting screws.
Items Part #
Bracket & Cable CONV2.5+CAB

For Replacing 2.5" 19mm drive with 17mm or 12mm drive
  • Spacer available for 12mm 2.5" hard drive to increase height to 19mm.
  • Spacer available for 17mm 2.5" hard drive to increase height to 19mm.
Items Part #
Bracket SPACER-12
Bracket SPACER-17